Wall Mounted Feeder Hay Rack Flat Manger Galvanizing Stainless Steel For Horses

Wall Mounted Feeder Hay Rack Flat Manger Galvanizing Stainless Steel For Horses. Compact hay rack with feed grid.

With a filling volume of approx. 90 litres, the hay rack holds approx. 6 - 6.5 kg of hay. Uring feeding, the grille is pressed against the feed by the swivel, so the horse receives small portions and is kept busy for a long time.

Sturdy fodder rake made of galvanised steel for wall mounting. The construction allows the horse to eat slowly and in a manner appropriate to its species. Bright galvanizing makes item more shiny. Roughage can be filled simply by lifting the grid from the front or, if required, from behind through an opening in the stall partition.

Large opening on the underside for easy removal of feed remains. Dimensions: 58 x 49 x 18 cm. Capacity: 90 litres = 6.3 kg hay. Mounting materials for wall mounting are not included!

The rack does not have its own rear wall and must be mounted on an existing wall! Screws and, if necessary, dowels - according to your installation possibilities on site - must be provided by the customer.

For feed racks, we recommend additionally securing the screws with liquid threadlocker e. Loctite or similar and checking the screw connections at regular intervals.

30 - 45 minutes for the assembly. Four hands are advantageous, but it can also be assembled alone. We recommend that you only screw the base plate loosely and only tighten the screws once the racks have been mounted on the wall and aligned. Should you change your mind and wish to return your item, this can be done if you notify us within 30 days of receiving your item.

Our warehouse is located in UK. We are sure we will try hard to help till you are satisfied!

---